GENERAL
|
Temperature range |
AECQ100 GRADE3 (-40 to +85˚C) |
Reverse battery protection |
Yes, internal |
Operating voltage |
6-22V, immunity to transients according to ISO 7637 |
Enclosure |
IP 60, custom CNC machined aluminum |
Connectors |
1 x 35 positions, AMP Automotive connector |
PC communication |
CAN BUS – Ecumaster interface, Peak or Kvaser |
Display Type |
TFT 800×480 |
Brightness of display |
5″ – 600 cd/m2, 7″ – 1000 cd/m2 |
INPUTS / OUTPUTS
|
Analogue inputs |
8 inputs, 10 bits, 0-5 V, software controlled pull-up/pull-down 10K resistor. Al analog inputs can be used as a switches |
Digital inputs |
8 digital inputs, software controlled input sensitivity (VR, Hall), software controlled 4K7 pull-up resistors, used for engine speed sensors, Flex Fuel, wheel speeds, turbocharger shaft speed. All digital inputs can be used as switches |
Outputs |
2 low side outputs (switch to ground), up to 2A, 1 analogue output (0-5V) 10 bits |
+5V Output |
Monitored 5V output for powering external sensors |
COMMUNICATION
|
CAN Interface |
2 x CAN2.0 A/B, 250, 500, 1000 Kbps |
CAN streams |
User-defined |
Serial communication |
RS232 Rx/Tx, AiM protocols, Ecumaster, Hondata Kpro, Autronic |
USB |
Used for logging to external USB memory |
OTHERS
|
Light Emitting Diodes |
15 ultra bright RGB LEDs |
Accelerometer/gyroscope |
3D accelerometer + 3D gyroscope for the analysis of vehicle dynamics |
Real-time clock |
Yes, battery powered |
Light sensor |
Yes, for automatic correction of brightness |
Temperature sensor |
Yes, for monitoring device temperature |